The Mining Process

Finding new mineral reserves is critical to the success of our company. Locating, extracting and processing these natural resources is a multi-year process that involves complex scientific, environmental and social planning.

Newmont is committed to build a sustainable mining business while leading in safety, environmental stewardship and social responsibility. Today, we primarily mine gold and copper, as well as silver and other metals and minerals.

Exploration

Exploration

exploration

Searching for gold is a complex, scientific and time-intensive process. With odds of only one in 3,000 discoveries leading to mine development, and only 10 percent of the world’s gold deposits containing enough gold to mine, exploration can be wearisome and expensive. While gold is found throughout the world at concentrations of between two and four parts per billion, we need to discover areas that contain 2,000 to 3,000 parts per billion to be profitable.

So how do our exploration teams locate future large-scale projects?

The first step is prospecting. But with veins of gold typically spanning just a few feet in width, and curving along the Earth’s geography, it is extremely difficult to pinpoint an area of exploration among thousands of square miles of land.

Obviously, it makes sense to start in areas known to contain gold, but there are nearly 900 such locations in the world to choose from. Ideally, it is best to start looking in areas less explored first, but we also seek exploration partners and/or acquire junior mining companies to expedite the process.

Newmont uses several methods to reduce the size of land to explore:

  • Evaluate the land’s geology
  • Analyze the geochemistry of soil sediment and water
  • Commission airborne geophysics surveys to record the level of electrical and magnetic current in the crust below

Once a target area has been identified, and geological, geophysical and geochemical data indicate a high probability of a deposit, drilling is conducted. Drilling helps us evaluate the type and grade of minerals in the ore.

But how many samples are needed? In what direction? How far apart? How deep? Because per-foot drilling costs are expensive, these decisions must be made carefully. Another way we sample is through trenching, which hugs the surface and is carried out by backhoes or bulldozers.

As crews drill, they mark the exact location and depth of each sample taken. Samples are then sent to an accredited lab, which identifies the type of minerals and grade of gold within them.

Once information is back from the lab, we supplement those findings with geologic, geochemical and geophysical data. Understanding the local geology is a very important part of the process, both economically and environmentally. The geology affects mining, processing and the ways in which we manage waste rock, tailings and water. It is also an important aspect of rehabilitation plans.

back to top

Modeling the Ore Body

Modeling the
Ore Body

ore

Production geologists use information they obtain from sampling, testing, mapping and observation to determine the most efficient and effective mining techniques, as well as to identify the grade (amount of mineral) in the ore. In gold and silver mining, grade is reported as grams per ton. Copper grade is reported as a percentage. It is important to know the grade to determine which rock is sent to the plant for processing and which rock is sent to the waste rock storage area.

By using this data and complex computer programs to more accurately define the orebody, mine engineers can determine mining methods, design blast patterns, design dig patterns, and maximize the safety and efficiency of production – as well as determine how the ore should be processed.

Geologists also use drilling and sampling data to identify wet areas. Water can cause major problems in both open pit and underground mines. If areas of high water content can be avoided or planned for in advance, we can reduce safety risks, costs and production interruptions.

back to top

Identifying and Addressing Impacts

Identifying and
Addressing
Impacts

impact

Starting a mine brings its own set of environmental and social challenges. To operate responsibly, we must weigh potential development risks against the profitability of production, and the local wealth and employment it creates.

Throughout the mine lifecycle – from the earliest exploration activity through closure – we strive to engage and consult with communities and governments that host our operations, as well as other stakeholders, with respect and transparency.

You can find more information about how Newmont works with and supports the local communities near our operations by visiting Newmont's annual sustainability report, Beyond the Mine.

Our programs protect and respect human rights, engage community members, contribute to communities’ development aspirations, and mitigate the impacts of our activities.

back to top

Designing and Constructing a Mine

Designing and
Constructing a
Mine

mine

There are two types of mine designs for mineral mining: surface (open pit) and underground.

Surface

Surface mines are generally preferred if the ore body is relatively shallow and uniform, and are made by digging into the Earth’s surface one layer at a time. The final mine is cone-shaped.

First, we drill holes in the ground and fill them with explosive. After the rock has been broken up by blasting, it is loaded into giant haul trucks using large shovels and front-end loaders. Rock containing gold, copper and other valuable minerals is hauled away for processing and waste rock is taken to a separate area for storage. Areas of waste rock are later rehabilitated.

As we dig farther down, it is necessary to dewater the mine to ensure that the water level remains below the pit floor. Each day, we pump thousands of gallons of water from the pit. Much of it is reused on-site (to control dust, etc.). Excess water is treated and discharged back into nearby rivers or lakes.

A significant amount of monitoring takes place in and around the open pit, to keep a watchful eye on:

  • Slope stability and dewatering-induced settlement
  • Noise, dust and vibration
  • Water levels and water quality, including pit wall run-off and groundwater
Underground

Underground mines are used to extract minerals or metals from deep in the Earth. When building an underground mine, we dig a tunnel to get to the minerals. This can be a straight vertical tunnel called a shaft or a tunnel that spirals gradually downwards, called a decline. To access the ore from the shaft or decline, we dig other tunnels. We also mine out tunnels to provide proper ventilation and emergency exits.

We mine the tunnels and the ore bodies by drilling and blasting. The broken-up ore is then transported to the surface for processing. Waste rock may be transported to the surface or left in the mine and used to fill empty space.

Once we remove all material from inside the tunnels, we support them to make them safe. The type of ground support needed depends on how stable the ground is and how long the tunnel is going to be used for. These factors are identified in advance so that engineers can design the mine for maximum safety and value.

Ground support may be provided by rock bolts or split sets, which are forced into drilled holes to exert pressure on the surrounding rock, which keeps it intact. Chemicals or grouts are sometimes added with rock bolts to give them greater strength. We also install wire mesh to keep smaller rocks from falling down.

High-pressure spraying of Shotcrete (a mortar/concrete mix) onto the tunnels’ walls and backs provides more support. As we complete mining in each stope, we backfill it with a cement mixture as well.

Underground mines pose a greater safety risk and limit the size of equipment that can be used; however, they cause less environmental disturbance.

back to top

Operating a Mine

Operating a
Mine

operating-mine

When operating a mine, we use stringent controls to prevent or mitigate any environmental impacts. Our environmental management systems are designed to ensure all environmental considerations – including management, monitoring, maintenance, training and action plans – are incorporated within an overall framework as an integral part of mining operations.

At all times, Newmont will operate in compliance with applicable laws, regulations and other legal requirements. In addition to this mandate, we use an internal management system that includes a global set of performance standards to provide a set of acceptable performance criteria within a framework of continuous improvement.

Another key aspect of Newmont's role as a leader in environmental stewardship is active collaboration with partners such as Conservation International. Partnerships like these help us better understand our impacts and together, we can develop specific tools to help us enhance the value that can be created from mining.

To learn more about our environmental management programs, visit Beyond the Mine.

back to top

Ore Processing

Ore
Processing

ore

Haul trucks transport the ore from open pits or underground operations to processing operations. Some ores may be stockpiled for later processing. Rock that is not economical to mine is stored in waste rock storage areas. The grade and type of ore determine the processing method used. Additionally, the geochemical makeup of the ore, including its hardness, sulfur content, carbon content and other minerals found within, impact the cost and methods used to extract gold.

Processing Methods

Depending on the ore, we process it using the following methods: We feed ore into a series of crushers and grinding mills to reduce the size of the ore particles and expose the mineral. Water is also added, which turns the ore into a slurry. We send this slurry to leaching tanks, where we add a weak cyanide solution to the slurry, which leaches gold and silver into the solution. This process removes up to 93 percent of the gold and 70 percent of the silver from the ore. Carbon granules are then added to the solution. The gold attaches to the carbon and is pulled from the solution. We then “strip” the gold from the carbon by washing it with a caustic cyanide solution. The carbon is later recycled. Next, we pump the gold-bearing solution through electro-winning cells, which extract metals from the solution using an electrical current.

After gold has been processed, the leftover waste material is called tailings. Tailings contain small amounts of cyanide and other hazardous chemicals, so they must be disposed of in an environmentally safe way. The tailings are stored in tailings dams, which are lined with impermeable layers. While the cyanide levels in the dam are safe, steps are taken to keep wildlife away from the dams.

Over time, the chemicals break down and the solids settle to the bottom so that the water can be returned to the plant to be used in processing.We then smelt the gold, which melts it in a furnace at about 1,202 degrees F. From there, the liquid gold is poured into molds, creating doré bars. Doré bars are unrefined gold bullion bars containing anywhere from 60 to 95 percent gold. We finally send the bars to a refinery for further processing into pure gold.

Alternative Ore Processing

We use alternative gold recovery methods in some processing plants to accommodate different ore characteristics or other requirements. For example, ore that has a high level of sulfide minerals or carbon (or both) is called refractory ore. Refractory ore resists normal processing methods as the high sulfide minerals trap gold particles, making it difficult for the cyanide to reach the gold and leach it.

Heating

To leach gold from refractory ore, it must be subjected to high temperature, high pressure and/or oxygen. Newmont treats refractory ore in two ways: by using an autoclave or a roaster.

An autoclave is used before leaching occurs. First, the slurry is heated and fed into an autoclave, where high-pressure steam, water and oxygen are applied to oxidize the sulfide material by a chemical reaction. The slurry is then cooled and sent back into the process to be leached.

An alternative to an autoclave is a roaster, a very high temperature oven that is often used instead of an autoclave if the ore to process contains a large amount of organic carbon. Roasting uses heat and air to burn the organic carbon into fuel and to burn the sulfur off ore, which we heat to 932 to 1,202 degrees F.

Heap Leaching

In heap leaching, we dump crushed ore into piles called heaps, to which we apply a weak cyanide solution, using drip feeders. The gold dissolves into the cyanide solution. The entire heap leach area is lined with heavy duty liners to ensure no solution leaks into the environment. Next, we collect the gold-cyanide solution in ditches and ponds, and then transport it to a recovery plant.

Flotation

Flotation is a method of separating minerals depending on their ability to attach to air bubbles.

Flotation can be used for a number of materials by adjusting the chemicals. At Newmont, it is used for copper recovery and, in a very limited number of cases, for gold processing.

We introduce air bubbles to the slurry while it is in small tanks, called flotation cells. We add some chemicals to the slurry to assist the process. The desired minerals stick to the bubbles and rise to the top, resulting in froth. The froth overflows from the tank, and is removed and sent to the next step in processing.

Gravity Circuit

A gravity circuit recovers coarse gold before it is leached. Gravity circuits use the same principles as gold panning: coarse gold is heavier than other material and will settle to the bottom so that it can be removed (gold is 19.3 times heavier than an equal volume of water).

back to top

Closing and Reclaiming a Mine

Closing and
Reclaiming a
Mine

reclaiming

Newmont is committed to leaving a positive legacy for the communities and the environment where we operate. In part, this commitment means developing an integrated approach to closure that takes into account community and environmental issues, and reclaiming disturbed land for beneficial use after our mines close.

Planning for closure and reclamation begins during the earliest stages of project development, before operations start at a new site, and continues during the development of the mine. Our goal is to minimize the disturbance of land in our exploration activities. We reclaim all disturbed ground, with the exception of roads if the local community or government wants them left intact.

Environmental Closure

Disturbed land is reclaimed progressively during the mine’s life. Our Closure and Reclamation Technical Team develops and applies a system that ensures the approach to site closure and reclamation, including the costs, are consistently evaluated and reported at every stage of the mine lifecycle.

In developing and implementing reclamation plans, Newmont seeks to apply a new scientific approach to address mineral waste generated from the extraction of precious metals. At several of our sites, we have pioneered techniques that have been shared in the industry as scientifically proven approaches to mine site closure and reclamation worldwide. All operations look to balance environmental solutions with post-mining beneficial land use.

Our Social closure and closure plans are designed to ensure:

  • Rehabilitation and Social closure stabilizes the site and its associated structures over time
  • Any water discharging from the site and any groundwater under the site will be of a quality such that it will not adversely affect aquatic life, or other users of the water resource

In order to restore the landscape for future uses such as ranching, recreation or wildlife habitat protection, we progressively rehabilitate areas of disturbed land in the mining area, which offers a number of advantages:

  • Improves the visual appearance of the disturbed areas
  • Establishes a cover to provide erosion control
  • Improves run-off water quality by minimizing silt loads
  • Controls dust
Social Closure

Closing a mine can have a significant impact on local communities. As such, in the earliest stages of project development, we engage with our stakeholders to ensure the value that is created during the mine operation is translated into lasting programs within the communities. Sites are required to set up a process for reviewing and updating closure plans regularly with external stakeholders over the life of the mine.

back to top